Overview
Zinsser Bulls Eye 1-2-3® can be tinted towards your top coat colour, to help overall coverage. Please enter the colour of your top coat in the box provided.
The colour will not be an exact match of the top coat, it will be the correct shade of primer suitable for the job.
Zinsser Bulls Eye is an all surface water-based primer and sealer for use on interior and exterior surfaces. A ‘bond coat’ primer, it is ideal for hard-to-stick surfaces, giving excellent adhesion without sanding.
- Tinted towards the colour of the top coat
- Adheres to all surfaces without sanding
- Seals stains & tannin bleed
- Dries in 30 mins, re-coat in 1 hour
- Seals graffiti, grease spots, bitumen and asphalt
Tinted Colour Information
Tinted paint is custom mixed in house at Next Day Paint using our Zinsser tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.| Area | Interior & Exterior |
| Recommended Use | Apply to interior and exterior walls, ceilings, doors, trim, fascia, soffits, foundations, railings, and related paintable surfaces |
| Base | Water-Based |
| Coverage | Up to 10m² per litre |
| Drying Time | 30 minutes |
| Re-Coat Time | 1 Hour |
| Recommended Coats | 1-2 Coats |
| Application Method | Brush, Roller, Conventional Spray |
| Clean Up | Remove as much paint as possible from the equipment before cleaning with water |
Preparation
Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss. Also ensure the product is free from excessive chalky material, grime, grease, oil, wax, mould or any contamination that may interfere with adhesion.
- Always wash the surface with a household cleaner, appropriate cleaning solution, or solvent. Clean new galvanised metal with methylated spirit
- Always ensure to remove loose or flaking material
- Sand any remaining paint to a smooth surface
- Sand exterior wood with a 80-100 grit sandpaper
- When sealing a stain always attempt to remove as much of the stain as possible prior to application
- New plaster should be sealed with
- To remove mould, treat area with
- Treat knots and sap streaks with
Application
Note: Always follow the manufacturer's instructions found on the tin.
Stir thoroughly before applying and test a small area to ensure colour and adhesion.
Zinsser Bulls Eye 123 is ready to use and does not require thinning
